Free on-site estimates(719) 232-1523
Paul's AsphaltService LLC · Colorado
Call (719) 232-1523 Request a Free Estimate

Paving Guide

Does My Palmer Lake Driveway Need a Permit Before Asphalt Paving Begins?

Most Palmer Lake driveways on grade need no building permit to pave, but street edge and Highway 105 work can. See who to call first, then book Paul's Asphalt.

For most Palmer Lake driveways that keep the same size and location, the asphalt paving itself usually does not need a building permit, because the regional building department lists driveways built directly on grade as work that needs no permit. The approval questions can come from two other places: the edge where your driveway meets a Town street, and any driveway that opens onto State Highway 105, where state access rules apply. Widening the driveway, moving the entrance or changing where water drains are also worth a phone call first.

Below, we sort out which office covers which part of the job and what Paul's Asphalt checks with you before paving. For the work itself, see our residential asphalt paving service in Palmer Lake.

When a Palmer Lake Driveway Needs a Permit Before Asphalt Paving Begins

A permit is usually not required before asphalt paving begins on a Palmer Lake driveway that stays on your own lot. Building permits for Palmer Lake run through the Pikes Peak Regional Building Department (PPRBD), which also serves Monument, Colorado Springs and El Paso County. PPRBD's list of work that does not need a permit includes, as item 8, "Private sidewalks, driveways, and platforms supported directly upon grade." A residential driveway paved on the ground is the kind of work that wording describes.

Two limits apply. The list does not mention asphalt or paving by name, and PPRBD asks anyone unsure to call 719-327-2880. And a building department exemption covers the building code only. The Town of Palmer Lake still controls its own streets, and the state still controls access to Highway 105.

A home backing onto Pike National Forest and a home near Rockin' the Rails Park get the same starting answer: the driveway on your lot is usually fine, and the edges of the job are what you confirm.

Does Repaving or Resurfacing an Existing Palmer Lake Driveway Change the Answer?

Repaving or resurfacing an existing Palmer Lake driveway in the same footprint usually leaves the answer unchanged, since the driveway is still a flat surface on grade. The exception is the street. If the work includes cutting back or rebuilding the apron where your driveway meets a Town street, that part can sit in the Town's right-of-way rather than on your lot.

Highway 105 driveways add one more point. The Colorado Department of Transportation says an existing access may need a permit when it "may have fallen into disrepair or may not meet current design standards." CDOT does not address repaving directly, so call before you schedule.

Palmer Lake Driveway Changes Most Likely to Need Approval

The changes most likely to need approval on a Palmer Lake driveway are the ones that move it, widen it at the street, change where runoff goes, or connect it to a road in a new way. The paving material matters far less than the footprint and the entrance.

Your project What to check first Who to call
Repave in the same footprint Whether the apron at the street is part of the job Town Hall (719-481-2953); PPRBD (719-327-2880) if unsure
Gravel to asphalt, wider driveway or new entrance Any change at the street edge Town Hall for Town streets; CDOT for Highway 105
Driveway that opens onto Highway 105 A new, moved or modified access, or a change in how the property is used CDOT Regional Access Unit for your location
Acreage outside town limits, such as Black Forest Which road the driveway joins: Town, county or state El Paso County Public Works for county roads
Sloped lot near Pike National Forest or toward Ben Lomand Where runoff from the new surface will go Town Hall to start

How to read it:

  • If you are repaving in the same spot and the apron stays as it is, then book the job. We go over the street edge with you at the free consultation.
  • If your driveway joins Highway 105, then contact CDOT early and give us your paving date once you have an answer.
  • If you are widening, moving the entrance or converting gravel, then call Town Hall and have Paul and his crew look at the lot so your plan matches the work.
  • If your lot is steep, then book a site visit. Our customers' reviews mention driveways with varying slope that we have paved.

When Paving Reaches the Street or the Town Right-of-Way in Palmer Lake

When paving reaches a Town street or the public right-of-way beside it, the Town of Palmer Lake is the office to ask. Its rules sit in the Municipal Code, linked from the Town of Palmer Lake website. Town Hall is at 42 Valley Crescent, phone 719-481-2953.

This comes up on jobs that rebuild the apron, replace a broken edge where asphalt meets the street, or add width at the entrance. It applies the same way on a lot by Greenland Open Space at the north edge of town as on a street below the Star on Sundance Mountain.

Outside town limits the office changes. For acreage in Black Forest or other properties on county-maintained roads, El Paso County Public Works lists a Work in Right of Way Application, and applicants must show they can pay for restoration and repairs. Monument, just south of Palmer Lake, has its own town rules, so a home across that line starts with Monument.

Palmer Lake Driveways That Open Onto Highway 105

A Palmer Lake driveway that opens onto State Highway 105 falls under Colorado's state highway access rules. CDOT requires an access permit to construct, relocate, close or modify a driveway onto a state highway, and also when the use of that access changes. The rules come from the State Highway Access Code, 2 CCR 601-1. Applications go to CDOT or the local jurisdiction acting as the issuing authority, and owners contact the Regional Access Unit for the property's location, not headquarters.

Highway 105 runs straight through Palmer Lake, with Interstate 25 to the east. We are based on it ourselves, at 702 Highway 105. CDOT's guidance does not mention resurfacing, so if the entrance stays exactly as it is, ask the access unit and keep the answer. If you widen or move the entrance, or the property's use is expected to change, the permit rule applies and the paving date should wait for it.

Steps to Take Before Your Palmer Lake Paving Date

The steps before your Palmer Lake paving date take a few phone calls:

  1. Confirm your lot is inside Palmer Lake town limits. Homes in Monument or Black Forest answer to different offices.
  2. Note what the job changes: width, entrance, drainage, or gravel becoming asphalt.
  3. Call Town Hall at 42 Valley Crescent (719-481-2953) if any work reaches the street, and PPRBD (719-327-2880) if you are unsure the exemption fits.
  4. If the driveway joins Highway 105, contact the CDOT Regional Access Unit for your area.
  5. If you have a homeowners association, check its covenants for any approval it requires.
  6. Book a free consultation with Paul's Asphalt, tell us what each office said, and keep any written approval for paving day.

Start early. Palmer Lake sits at about 7,139 feet on the Palmer Divide, and the paving season up here winds down in the fall, so a question left until then can push the job later. Once it is paved, our article on how long a new asphalt driveway lasts in Palmer Lake covers what comes next.

Risks of Paving in Palmer Lake Without a Needed Approval

Paving in Palmer Lake without a needed approval can leave you with work an office asks you to change after the fact. The likely trouble spot is the entrance. Fresh asphalt at a Town street edge or a Highway 105 access is the part an approving office cares about, and the hardest part to redo.

A late fix can also mean delays and a second round of work. The better order is to ask Town Hall, El Paso County or CDOT first, then pave.

Why Hire Paul's Asphalt for a Palmer Lake Driveway Paving Job

Paul's Asphalt has served Palmer Lake and the surrounding communities for 10 years from Highway 105. We are locally owned, Paul works on jobs himself, and the company holds an A+ BBB rating and 4.8 stars on Google.

What that means for your project:

  • A free consultation first. We look at where your driveway meets the street and what the job changes, so you know which office to call.
  • Fast scheduling once you are clear. Ken W. wrote: "Paul responded to my request the very next day and then the following day they paved our driveways."
  • Hard sites are normal work. Marcus G. wrote: "I had a difficult driveway to pave due to varying slope and Paul and his crew did a great job." Long rural driveways are regular work for us too.
  • We come back. Reviews mention the crew returning to fix issues after the job.
  • A line that answers. Our phone is open 24 hours, for homes from Monument and Black Forest to Colorado Springs.

The Bottom Line

Most Palmer Lake driveways that keep their size and location can be paved without a building permit, since PPRBD lists driveways on grade as work that needs none. The questions come at the edges: Town streets and right-of-way go to Town Hall, county roads to El Paso County, and any driveway onto Highway 105 to CDOT. Make those calls before your paving date and let our crew handle the rest. Call Paul's Asphalt at (719) 232-1523 to book your free consultation.


Providing Asphalt Contractor Services to Palmer Lake and the Greater Colorado Springs Area

Request a Quote

Ready for pavement that lasts?

Call Paul's crew for a free, no-pressure estimate. You'll get a straight answer on what your pavement needs and what it will cost.

Illustration of a Paul's Asphalt dump truck on a mountain road
Call Now Free Estimate